Main Features:
*LCD digital display show voltage, load and battery info in real time.
*Peak power is three times of rated power.
*Can work with inductive load such as air conditioner, motor door and so on.
*Pure sine wave output, available for sensitive load.
*4-step progressive charging, 7 battery type selector.
*Fast and powerful charger with 35A and 70A.
*Accept generator’s energy output.
*High power factor 0.9, low power consumption.
*Automatically transfer between battery and line modes.
*Microprocessor control guarantees high reliability.
*Bypass without battery connected.
*Remote control function.
*Protection against: Over load, over temperature, over charging, low battery
*Reverse connection (optional by hard connector), Blackouts
Specification:
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
MODEL |
LW-6000 |
| |
|
Nominal Power |
6000W |
| |
|
AC Input |
| |
|
Phase & |
Single phase & Pure Sine Wave |
| |
|
waveform |
| |
|
Voltage |
110/120/130VAC or 220/230/240VAC |
| |
|
Acceptable Voltage |
95-126VAC or 194-253VAC±4% |
| |
|
Low Line Disconnect |
85VAC±4% or 184VAC±4% |
| |
|
Low Line Re-connect |
95VAC±4% or 194VAC±4% |
| |
|
High Line Disconnect |
136VAC±4% or 263VAC±4% |
| |
|
High Line Re-connect |
126VAC±4% or 253VAC±4% |
| |
|
Frequency |
50Hz:41-54Hz 60Hz:51-64Hz |
| |
|
AC Output |
| |
|
Phase & waveform |
Single phase & Pure Sine Wave (bypass mode sync to input) |
| |
|
Voltage |
110/120/130VAC or 220/230/240VAC±10%rms (bypass mode sync to input) |
| |
|
Frequency |
50Hz±0.3Hz 60Hz±0.3Hz (bypass mode sync to input) |
| |
|
Peak Power |
3 times of rating power |
| |
|
Short Circuit |
Yes, shutdown after 10ms |
| |
|
Protection |
| |
|
Power Factor |
0.9-1.0 |
| |
|
DC Input |
| |
|
Battery Voltage |
12VDC or 24VDC or 48VDC |
| |
|
Minimum Start |
10VDC or 20VDC or 40VDC |
| |
|
Voltage |
| |
|
Low Battery Alarm |
10.5±0.3vdc or 21±0.6vdc or 42±1.2vdc |
| |
|
Low DC input |
10±0.3vdc or 20±0.6vdc or 40±1.2vdc |
| |
|
Shut-down |
| |
|
High DC input Alarm & Fault |
16±0.3vdc or 32±0.6vdc or 64±1.2vdc |
| |
|
High DC input |
15.5±0.3vdc or 31±0.6vdc or 62±1.2vdc |
| |
|
Recovery |
| |
|
MAX Charger |
20A/35A/ 50A/75A/90A(According to the Inverter model) |
| |
|
Current |
| |
|
System parameter |
| |
|
Battery Mode |
>85% |
| |
|
Efficiency? |
| |
|
Line Mode |
>96% |
| |
|
Efficiency? |
| |
|
power saver |
Load |
| |
|
Audible Alarm |
Sounding when the heat sink’s tem is over 100? and shutdown after 30 seconds. |
| |
|
Over Load |
110% |
| |
|
Protection |
Load>150%, beeps 0.5s every 1s, and Fault after 20s. |
| |
|
Protections |
low battery?over charging?over temp?over load |
| |
|
Communications |
RS-232/USB/SNMP(custom-made) |
| |
|
Operating Environment |
0-40?,0-90%RH(non-condensing) |
| |
|
Audible Noise |
|
| |
|
Net Weight(KG) |
49kg |
| |
|
Dimension L X W X H |
650 X223 X185mm |
Sản phẩm cùng loại 