INVERTER ZLPOWER
Introduction of Function
Main Features:
*Adopt advanced MCU microprocessor control technology.
*Modified sine wave output.
*User selectable for wide or narrow input voltage range.
*Full automatic and silent operation.
*Intelligent speed fan to release heat.
*Compact size for convenient use and storage
*Built-in 10Amp super charger for up to 200Ah battery, off charging mode, even inverter not start, it can still charge.
*Small scale and cost effective inverter for home appliances and office equipment
*Multi-functional LED indicator light and alarm device.
Specificaiton:
|
Home Inverter MODEL
|
IG1000
|
|
CAPACITY
|
VA/W
|
1000VA / 600W
|
|
INPUT
|
Phase
|
Single phase
|
|
Voltage
|
220 / 230 / 240VAC
|
|
Voltage Range
|
170-280VAC ( Narrow Range )
|
|
90-280VAC (Wide Range)
|
|
OUTPUT
|
Phase
|
Single phase
|
|
Voltage
|
230VAC
|
|
Voltage Regulation(Batt. Mode)
|
+10% ~ 18%
|
|
Frequency
|
50Hz or 60Hz
|
|
Frequency Regulation (Batt. Mode)
|
+/- 0.1 Hz
|
|
Output Waveform (Batt. Mode)
|
Modified Sine Wave
|
|
POWER FACTOR
|
P.F.
|
0.6
|
|
DC Voltage
|
24V
|
|
BATTERY
|
Charger Current
|
10 Amp + / - 1Amp
|
|
Floating Voltage
|
27.4V + / - 0.4V
|
|
Overcharge Protection
|
30V +/- 0.6V charger stops and fault
|
|
TRANSFER TIME
|
Typical
|
8ms
|
|
EFFICIENCY
|
DC to AC
|
>80%
|
|
INDICATOR
|
AC Mode
|
Green LED lighting
|
|
Battery Mode
|
Yellow LED lighting
|
|
Battery Charging Mode
|
Green LED flashing every 2 seconds
|
|
Overload
|
Red LED flashing every 0.5 second
|
|
Fault
|
Red LED lighting
|
|
AUDIBLE ALARM
|
Low Battery at Battery Mode
|
Sounding every 2 seconds
|
|
Overload
|
Sounding every 0.5 second
|
|
Fault
|
Continously sounding
|
|
PROTECTION
|
Full Protection
|
Deep Discharge, Overcharge, and Overload protection
|
|
PHYSICAL
|
Dimension (L x W x H) mm
|
224 X 255 X 80
|
|
Net Weight (kgs)
|
2.2
|
|
ENVIRONMENT
|
Operating Environment
|
0~40 Degrees Centigrade, 0~90% relative humidity (non-condensing)
|
|
Noise Level
|
Less than 50dB
|
Sản phẩm cùng loại 